12 LARGE HOLDS ($299): 12 or more if we have medium sizes holds in stock, suitable for vertical to steep terrain for novice/intermediate climbers.
25 TINY JIBS ($50): Suitable for slabs and vertical terrain for advanced climbers.
15 SMALL HOLDS ($50): For slabs, vertical and low angles.
- Unbeatable strength and texture, - Includes stainless steel washers in all screw holes to increase longevity, - DOES NOT include bolts or screws, - Shipped to Australia within 2-3 business days, - Local pick up (Perth Metro) within 1-2 business days, - Shapes, colours and sizes may vary depending on stock.
TNUT Climbing is dedicated to providing a range of climbing holds at the highest quality.
Whenever TNUT Climbing holds are set on a wall, climbers are immediately drawn to them - they want to feel them, put on their shoes, chalk up and climb.
Holds are made of resistant polyurethane material.
All holds are engineered with stainless steel washers for longevity.
Screw holes have been meticulously placed to efficiently end spinning holds.
Shallow bolt holes prevent hazardous use of monos.
Hollow backs engineered to reduce weight and cost of large holds.
Texture is the perfect balance between comfort and friction.
Shapes feature some subtle level of details.
Profiles foster creative route setting.
Designed and produced by an experienced rockclimber and route setter.
Designed and manufactured in Western Australia
TNUT Climbing is owned by Remi Vignals who is currently Head Route Setter at Rockface Climbing Centre in Perth (Western Australia). Remi has been route setting for over 10 years and has climbed in many parts of the World.
TNUT CLIMBING - the holds of choice for the best Australian climbing walls.
Most of our BOLT-ON HOLDS have 2 holes:
The 10mm diameter hole is for fixing the hold into a standard 3/8" t-nut and requires 3/8" bolts of varying lengths.
The 3/16" diameter hole prevents the holds from spinning. We recommend using non-self drilling timber screws with head size of 8G/10G x 30mm to 60mm.
Our SCREW-ON HOLDS have at least two holes of diameter 3/16". We recommend using non-self drilling timber screws with head size of 10G x 30mm to 50mm.
All 10mm holes and most 3/16" holes have been reinforced with marine grade stainless steel washers (316).
TNUT Climbing does not include bolts and/or screws with any sets of holds.
TNUT Climbing is determined to offer a range of eye-catching colours widely used by other hold manufacturers from Europe and the US. We have the formulas needed to achieve the following distinct and codified colours (RAL and PANTONE):
Jet Black RAL 9005
Sky Blue RAL 5015
Orange RAL 2003
Teal RAL 6027
Gray RAL 7001
Yellow RAL 1021
Yellow Pantone 115C
Violet RAL 4008
Purple RAL 4005
Green Pantone 7739C or 16-16
Dark Brown (~ RAL 8015)
Light Brown (~ RAL 2013)
Red (~Pantone 3517C)
Light Red (~ RAL 3028)
Gold (~ RAL 1005)
Yellow (~ RAL 1018)
Dark Blue (~ RAL 5005)
Light Blue (~ Pantone 1746 C)
Dark Green (~Pantone 2245 C)
Green (~Pantone 7740 C)
Grassy Green (~ RAL 6017)
Natural (~Pantone 7499C)
Off White (~RAL 1015)
+ a lot more...
Fluoro Green (Pantone 802C)
Fluoro RED (Pantone 805C)
Custom made colours:
Provided you have few weeks up your sleeves, TNUT Climbing will attempt to match your existing hold colour (mimimum order apply). Here is our range of custom made colours as of 2018:
Dark Purple (~Pantone 7447 C)
Blue (~Pantone 7690 C)
Aqua (~Pantone 325 C)
Fluro Green (~Pantone 2287 C)
Vivid Green (~Pantone 7726 C)
Khaki (~ RAL 7003)
Red (~RAL 3020)
TNUT Climbing's effort into standardising and customising colours will allow head route setters to extend their range of existing colours and climbers to easily distinguish between colours on the wall.